1. Secure the top screw

• Start by attaching the top screw of the visor, but don’t fully tighten it yet.

• Slide the visor left or right until you find the exact center relative to the screen.

• Once centered, fully tighten the top screw.

2. Position and align the side panels

• Place the side panels in position, but don’t tighten them yet.

• Make sure the top panel sits perfectly straight.
  (If the side panels are mounted too low, the top panel won't be straight— raise them slightly until everything is level.)

• Once the visor is fully squared and aligned, tighten both side panels.

3. Repeat the same steps for vertical orientation

• Rotate the screen to portrait mode.

• Follow the same order:

  1. Attach and center the top screw.

  2. Check alignment.

  3. Tighten the side panels.

Tip: Taking the time to align everything properly ensures the shade stays secure and blocks light effectively in both landscape and portrait mode.